This is a very large camera, measuring approximately 5-3/8" x 5-1/2" x 3-1/2" (137 x 130 x 89 mm). Due to its size, a single BoxTopper hook and loop strap cannot secure it. However, the 2 straps together hold it well, if configured as shown on this page.
Note that the strap at left in this picture is connected to the BoxTopper behind the back clamp. This keeps the strap toward the rear so it doesn't interfere with the winding knob.

The 2nd strap is connected to the slot on the same side in 2 places as shown. This makes it form a "U", providing a solid place to which the other strap is hooked. You can adjust this "U" strap as needed so that the top strap has enough tension and contact area to grip securely.

Closeup of the strap configuration. The top strap was run through the camera's handle, then attached to the "U" strap. Note that the top strap is angled slightly toward the rear due to the proper placement of its other end as shown in the top picture. This keeps it clear of the winding knob.

BACK